********* Start testing of qmltest *********
Config: Using QtTest library 6.12.0, Qt 6.12.0 (arm64-little_endian-lp64 shared (dynamic) debug build; by Apple LLVM 16.0.0 (clang-1600.0.26.3)), macos 13.6.4
PASS   : qmltest::Category3DAxis Invalid::initTestCase()
QWARN  : qmltest::Category3DAxis Invalid::test_invalid() qt.graphs3d.axis.properties: setLabelAutoAngle invalid angle degree.degree has been set to 0.0f
QWARN  : qmltest::Category3DAxis Invalid::test_invalid() qt.graphs3d.axis.properties: setLabelAutoAngle invalid angle degree.degree has been set to 90.0f
QWARN  : qmltest::Category3DAxis Invalid::test_invalid() qt.graphs3d.axis.properties: setMax tried to set negative maximum for an axis that only supports positive values and zero: 0.000000
QWARN  : qmltest::Category3DAxis Invalid::test_invalid() qt.graphs3d.axis.properties: setMin tried to set minimum to equal or larger than maximum for value axis. Maximum automatically adjusted to a valid one: 0.000000 --> 11.000000
QWARN  : qmltest::Category3DAxis Invalid::test_invalid() qt.graphs3d.axis.properties: setTitleOffset invalid value. Valid range for title offset is between -1.0f and 1.0f
PASS   : qmltest::Category3DAxis Invalid::test_invalid()
PASS   : qmltest::Category3DAxis Invalid::cleanupTestCase()
PASS   : qmltest::Category3DAxis Change::initTestCase()
PASS   : qmltest::Category3DAxis Change::test_change()
PASS   : qmltest::Category3DAxis Change::cleanupTestCase()
PASS   : qmltest::Category3DAxis Initialized::initTestCase()
PASS   : qmltest::Category3DAxis Initialized::test_initialized()
PASS   : qmltest::Category3DAxis Initialized::cleanupTestCase()
PASS   : qmltest::Category3DAxis Initial::initTestCase()
PASS   : qmltest::Category3DAxis Initial::test_initial()
PASS   : qmltest::Category3DAxis Initial::cleanupTestCase()
PASS   : qmltest::LogValue3DAxisFormatter Invalid::initTestCase()
QWARN  : qmltest::LogValue3DAxisFormatter Invalid::test_invalid() qt.graphs3d.axis.properties: setBase the logarithm base must be greater than 0 and not equal to 1, attempted: 1.0
QWARN  : qmltest::LogValue3DAxisFormatter Invalid::test_invalid() qt.graphs3d.axis.properties: setBase the logarithm base must be greater than 0 and not equal to 1, attempted: -1.0
PASS   : qmltest::LogValue3DAxisFormatter Invalid::test_invalid()
PASS   : qmltest::LogValue3DAxisFormatter Invalid::cleanupTestCase()
PASS   : qmltest::LogValue3DAxisFormatter Change::initTestCase()
PASS   : qmltest::LogValue3DAxisFormatter Change::test_change()
PASS   : qmltest::LogValue3DAxisFormatter Change::cleanupTestCase()
PASS   : qmltest::LogValue3DAxisFormatter Initialized::initTestCase()
PASS   : qmltest::LogValue3DAxisFormatter Initialized::test_initialized()
PASS   : qmltest::LogValue3DAxisFormatter Initialized::cleanupTestCase()
PASS   : qmltest::LogValue3DAxisFormatter Initial::initTestCase()
PASS   : qmltest::LogValue3DAxisFormatter Initial::test_initial()
PASS   : qmltest::LogValue3DAxisFormatter Initial::cleanupTestCase()
PASS   : qmltest::Series-Axis 3D Change::initTestCase()
PASS   : qmltest::Series-Axis 3D Change::test_changed()
PASS   : qmltest::Series-Axis 3D Change::cleanupTestCase()
PASS   : qmltest::Series-Axis 3D Initial::initTestCase()
PASS   : qmltest::Series-Axis 3D Initial::test_inital()
PASS   : qmltest::Series-Axis 3D Initial::cleanupTestCase()
PASS   : qmltest::Value3DAxis Invalid::initTestCase()
QWARN  : qmltest::Value3DAxis Invalid::test_invalid() qt.graphs3d.axis.properties: setSegmentCount illegal segment count automatically adjusted to a legal one: -1 --> 1
QWARN  : qmltest::Value3DAxis Invalid::test_invalid() qt.graphs3d.axis.properties: setSubSegmentCount illegal subsegment count automatically adjusted to a legal one: -1 -> 1
QWARN  : qmltest::Value3DAxis Invalid::test_invalid() qt.graphs3d.axis.properties: setLabelAutoAngle invalid angle degree.degree has been set to 0.0f
QWARN  : qmltest::Value3DAxis Invalid::test_invalid() qt.graphs3d.axis.properties: setLabelAutoAngle invalid angle degree.degree has been set to 90.0f
QWARN  : qmltest::Value3DAxis Invalid::test_invalid() qt.graphs3d.axis.properties: setMax tried to set maximum to equal or smaller than minimum for value axis. Minimum automatically adjusted to a valid one: 0.000000 --> -11.000000
QWARN  : qmltest::Value3DAxis Invalid::test_invalid() qt.graphs3d.axis.properties: setMin tried to set minimum to equal or larger than maximum for value axis. Maximum automatically adjusted to a valid one: -10.000000 --> 11.000000
QWARN  : qmltest::Value3DAxis Invalid::test_invalid() qt.graphs3d.axis.properties: setTitleOffset invalid value. Valid range for title offset is between -1.0f and 1.0f
PASS   : qmltest::Value3DAxis Invalid::test_invalid()
PASS   : qmltest::Value3DAxis Invalid::cleanupTestCase()
PASS   : qmltest::Value3DAxis Change::initTestCase()
PASS   : qmltest::Value3DAxis Change::test_change()
PASS   : qmltest::Value3DAxis Change::cleanupTestCase()
PASS   : qmltest::Value3DAxis Initialized::initTestCase()
PASS   : qmltest::Value3DAxis Initialized::test_initialized()
PASS   : qmltest::Value3DAxis Initialized::cleanupTestCase()
PASS   : qmltest::Value3DAxis Initial::initTestCase()
PASS   : qmltest::Value3DAxis Initial::test_initial()
PASS   : qmltest::Value3DAxis Initial::cleanupTestCase()
QWARN  : qmltest::UnknownTestFunc() qt.graphs3d.properties: addCustomItem tried to access customItems list at invalid index.
QWARN  : qmltest::UnknownTestFunc() qt.graphs3d.properties: addCustomItem tried to access customItems list at invalid index.
PASS   : qmltest::Bars3D Custom::initTestCase()
PASS   : qmltest::Bars3D Custom::test_1_custom_items()
PASS   : qmltest::Bars3D Custom::test_2_add_custom_items()
PASS   : qmltest::Bars3D Custom::test_3_change_custom_items()
PASS   : qmltest::Bars3D Custom::test_4_remove_custom_items()
PASS   : qmltest::Bars3D Custom::cleanupTestCase()
PASS   : qmltest::Bars3D Theme::initTestCase()
PASS   : qmltest::Bars3D Theme::test_1_add_theme()
PASS   : qmltest::Bars3D Theme::test_2_change_theme()
PASS   : qmltest::Bars3D Theme::cleanupTestCase()
PASS   : qmltest::Bars3D Series::initTestCase()
QDEBUG : qmltest::Bars3D Series::test_1_add_series() qml: top: QQuickItem_QML_38(0x6000032857a0)
PASS   : qmltest::Bars3D Series::test_1_add_series()
PASS   : qmltest::Bars3D Series::test_2_remove_series()
PASS   : qmltest::Bars3D Series::test_3_remove_series()
PASS   : qmltest::Bars3D Series::test_4_primary_series()
PASS   : qmltest::Bars3D Series::test_5_selected_series()
PASS   : qmltest::Bars3D Series::test_6_has_series()
PASS   : qmltest::Bars3D Series::cleanupTestCase()
PASS   : qmltest::Bar3DSeries Change::initTestCase()
PASS   : qmltest::Bar3DSeries Change::test_1_change()
PASS   : qmltest::Bar3DSeries Change::test_2_test_change()
PASS   : qmltest::Bar3DSeries Change::test_3_change_common()
PASS   : qmltest::Bar3DSeries Change::test_4_change_gradient_stop()
PASS   : qmltest::Bar3DSeries Change::test_5_change_rowColors()
PASS   : qmltest::Bar3DSeries Change::cleanupTestCase()
PASS   : qmltest::Bar3DSeries Initialized::initTestCase()
PASS   : qmltest::Bar3DSeries Initialized::test_1_initialized()
PASS   : qmltest::Bar3DSeries Initialized::test_2_initialized_common()
PASS   : qmltest::Bar3DSeries Initialized::cleanupTestCase()
PASS   : qmltest::Bar3DSeries Initial::initTestCase()
PASS   : qmltest::Bar3DSeries Initial::test_1_initial()
PASS   : qmltest::Bar3DSeries Initial::test_2_initial_common()
PASS   : qmltest::Bar3DSeries Initial::cleanupTestCase()
PASS   : qmltest::Bars3D Common::initTestCase()
PASS   : qmltest::Bars3D Common::test_1_common()
QWARN  : qmltest::Bars3D Common::test_2_change_common() qt.graphs3d.properties: setPolar polar type with bars is not supported.
PASS   : qmltest::Bars3D Common::test_2_change_common()
QWARN  : qmltest::Bars3D Common::test_3_change_invalid_common() qt.graphs3d.properties: setSelectionMode must specify one of either row or column selection modein conjunction with slicing mode.
QWARN  : qmltest::Bars3D Common::test_3_change_invalid_common() qt.graphs3d.properties: setRenderingMode invalid rendering mode used
QWARN  : qmltest::Bars3D Common::test_3_change_invalid_common() qt.graphs3d.properties: setPolar polar type with bars is not supported.
QWARN  : qmltest::Bars3D Common::test_3_change_invalid_common() qt.graphs3d.properties: setAmbientLightStrength invalid value. Valid range for ambientLightStrength is between 0.0f and 1.0f
QWARN  : qmltest::Bars3D Common::test_3_change_invalid_common() qt.graphs3d.properties: setAmbientLightStrength invalid value. Valid range for ambientLightStrength is between 0.0f and 1.0f
QWARN  : qmltest::Bars3D Common::test_3_change_invalid_common() qt.graphs3d.properties: setLightStrength invalid value. Valid range for lightStrength is between 0.0f and 10.0f
QWARN  : qmltest::Bars3D Common::test_3_change_invalid_common() qt.graphs3d.properties: setLightStrength invalid value. Valid range for lightStrength is between 0.0f and 10.0f
QWARN  : qmltest::Bars3D Common::test_3_change_invalid_common() qt.graphs3d.properties: setShadowStrength invalid value. Valid range for shadowStrength is between 0.0f and 100.0f
QWARN  : qmltest::Bars3D Common::test_3_change_invalid_common() qt.graphs3d.properties: setShadowStrength invalid value. Valid range for shadowStrength is between 0.0f and 100.0f
PASS   : qmltest::Bars3D Common::test_3_change_invalid_common()
QWARN  : qmltest::Bars3D Common::test_4_common_initialized() qt.graphs3d.properties: setRenderingMode invalid rendering mode used
PASS   : qmltest::Bars3D Common::test_4_common_initialized()
PASS   : qmltest::Bars3D Common::cleanupTestCase()
PASS   : qmltest::Bars3D Basic::initTestCase()
PASS   : qmltest::Bars3D Basic::test_1_basic()
PASS   : qmltest::Bars3D Basic::test_2_basic_change()
PASS   : qmltest::Bars3D Basic::test_3_basic_change_invalid()
PASS   : qmltest::Bars3D Basic::cleanupTestCase()
PASS   : qmltest::Bars3D Empty::initTestCase()
PASS   : qmltest::Bars3D Empty::test_empty()
PASS   : qmltest::Bars3D Empty::cleanupTestCase()
PASS   : qmltest::ItemModelBarDataProxy MultiMatchBehaviour::initTestCase()
PASS   : qmltest::ItemModelBarDataProxy MultiMatchBehaviour::test_0_async_dummy()
PASS   : qmltest::ItemModelBarDataProxy MultiMatchBehaviour::test_1_test_multimatch()
PASS   : qmltest::ItemModelBarDataProxy MultiMatchBehaviour::test_2_multimatch()
PASS   : qmltest::ItemModelBarDataProxy MultiMatchBehaviour::test_3_test_multimatch()
PASS   : qmltest::ItemModelBarDataProxy MultiMatchBehaviour::test_4_multimatch()
PASS   : qmltest::ItemModelBarDataProxy MultiMatchBehaviour::test_5_test_multimatch()
PASS   : qmltest::ItemModelBarDataProxy MultiMatchBehaviour::test_6_multimatch()
PASS   : qmltest::ItemModelBarDataProxy MultiMatchBehaviour::test_7_test_multimatch()
PASS   : qmltest::ItemModelBarDataProxy MultiMatchBehaviour::test_8_multimatch()
PASS   : qmltest::ItemModelBarDataProxy MultiMatchBehaviour::test_9_test_multimatch()
PASS   : qmltest::ItemModelBarDataProxy MultiMatchBehaviour::cleanupTestCase()
PASS   : qmltest::ItemModelBarDataProxy Change::initTestCase()
PASS   : qmltest::ItemModelBarDataProxy Change::test_1_change()
PASS   : qmltest::ItemModelBarDataProxy Change::test_2_test_change()
PASS   : qmltest::ItemModelBarDataProxy Change::test_3_test_categoryIndex()
PASS   : qmltest::ItemModelBarDataProxy Change::cleanupTestCase()
PASS   : qmltest::ItemModelBarDataProxy Initialized::initTestCase()
PASS   : qmltest::ItemModelBarDataProxy Initialized::test_initialized()
PASS   : qmltest::ItemModelBarDataProxy Initialized::cleanupTestCase()
PASS   : qmltest::ItemModelBarDataProxy Initial::initTestCase()
PASS   : qmltest::ItemModelBarDataProxy Initial::test_initial()
PASS   : qmltest::ItemModelBarDataProxy Initial::cleanupTestCase()
PASS   : qmltest::Custom3DItem Change::initTestCase()
PASS   : qmltest::Custom3DItem Change::test_change()
PASS   : qmltest::Custom3DItem Change::cleanupTestCase()
PASS   : qmltest::Custom3DItem Initialized::initTestCase()
PASS   : qmltest::Custom3DItem Initialized::test_initialized()
PASS   : qmltest::Custom3DItem Initialized::cleanupTestCase()
PASS   : qmltest::Custom3DItem Initial::initTestCase()
PASS   : qmltest::Custom3DItem Initial::test_initial()
PASS   : qmltest::Custom3DItem Initial::cleanupTestCase()
PASS   : qmltest::Custom3DLabel Change::initTestCase()
PASS   : qmltest::Custom3DLabel Change::test_change()
PASS   : qmltest::Custom3DLabel Change::cleanupTestCase()
PASS   : qmltest::Custom3DLabel Initialized::initTestCase()
PASS   : qmltest::Custom3DLabel Initialized::test_initialized()
PASS   : qmltest::Custom3DLabel Initialized::cleanupTestCase()
PASS   : qmltest::Custom3DLabel Initial::initTestCase()
PASS   : qmltest::Custom3DLabel Initial::test_initial()
PASS   : qmltest::Custom3DLabel Initial::cleanupTestCase()
PASS   : qmltest::Custom3DVolume Invalid::initTestCase()
QWARN  : qmltest::Custom3DVolume Invalid::test_invalid() qt.graphs3d.properties: setAlphaMultiplier Attempted to set negative multiplier.
QWARN  : qmltest::Custom3DVolume Invalid::test_invalid() qt.graphs3d.properties: setSliceFrameGaps attempted to set negative values.
QWARN  : qmltest::Custom3DVolume Invalid::test_invalid() qt.graphs3d.properties: setSliceFrameThicknesses attempted to set negative values.
QWARN  : qmltest::Custom3DVolume Invalid::test_invalid() qt.graphs3d.properties: setSliceFrameWidths attempted to set negative values.
PASS   : qmltest::Custom3DVolume Invalid::test_invalid()
PASS   : qmltest::Custom3DVolume Invalid::cleanupTestCase()
PASS   : qmltest::Custom3DVolume Change::initTestCase()
PASS   : qmltest::Custom3DVolume Change::test_change()
PASS   : qmltest::Custom3DVolume Change::cleanupTestCase()
PASS   : qmltest::Custom3DVolume Initialized::initTestCase()
PASS   : qmltest::Custom3DVolume Initialized::test_initialized()
PASS   : qmltest::Custom3DVolume Initialized::cleanupTestCase()
PASS   : qmltest::Custom3DVolume Initial::initTestCase()
PASS   : qmltest::Custom3DVolume Initial::test_initial()
PASS   : qmltest::Custom3DVolume Initial::cleanupTestCase()
PASS   : qmltest::InputHandler3D Change::initTestCase()
PASS   : qmltest::InputHandler3D Change::test_change()
PASS   : qmltest::InputHandler3D Change::cleanupTestCase()
PASS   : qmltest::InputHandler3D Initialized::initTestCase()
PASS   : qmltest::InputHandler3D Initialized::test_initialized()
PASS   : qmltest::InputHandler3D Initialized::cleanupTestCase()
PASS   : qmltest::InputHandler3D Initial::initTestCase()
PASS   : qmltest::InputHandler3D Initial::test_initial()
PASS   : qmltest::InputHandler3D Initial::cleanupTestCase()
PASS   : qmltest::Scatter3D Common::initTestCase()
PASS   : qmltest::Scatter3D Common::test_1_common()
PASS   : qmltest::Scatter3D Common::test_2_change_common()
QWARN  : qmltest::Scatter3D Common::test_3_change_invalid_common() qt.graphs3d.properties: setSelectionMode unsupported selection mode - only none and item selection modes are supported
QWARN  : qmltest::Scatter3D Common::test_3_change_invalid_common() qt.graphs3d.properties: setRenderingMode invalid rendering mode used
QWARN  : qmltest::Scatter3D Common::test_3_change_invalid_common() qt.graphs3d.properties: setAmbientLightStrength invalid value. Valid range for ambientLightStrength is between 0.0f and 1.0f
QWARN  : qmltest::Scatter3D Common::test_3_change_invalid_common() qt.graphs3d.properties: setAmbientLightStrength invalid value. Valid range for ambientLightStrength is between 0.0f and 1.0f
QWARN  : qmltest::Scatter3D Common::test_3_change_invalid_common() qt.graphs3d.properties: setLightStrength invalid value. Valid range for lightStrength is between 0.0f and 10.0f
QWARN  : qmltest::Scatter3D Common::test_3_change_invalid_common() qt.graphs3d.properties: setLightStrength invalid value. Valid range for lightStrength is between 0.0f and 10.0f
QWARN  : qmltest::Scatter3D Common::test_3_change_invalid_common() qt.graphs3d.properties: setShadowStrength invalid value. Valid range for shadowStrength is between 0.0f and 100.0f
QWARN  : qmltest::Scatter3D Common::test_3_change_invalid_common() qt.graphs3d.properties: setShadowStrength invalid value. Valid range for shadowStrength is between 0.0f and 100.0f
PASS   : qmltest::Scatter3D Common::test_3_change_invalid_common()
QWARN  : qmltest::Scatter3D Common::test_4_common_initialized() qt.graphs3d.properties: setRenderingMode invalid rendering mode used
PASS   : qmltest::Scatter3D Common::test_4_common_initialized()
PASS   : qmltest::Scatter3D Common::cleanupTestCase()
PASS   : qmltest::Scatter3D Basic::initTestCase()
PASS   : qmltest::Scatter3D Basic::test_basic()
PASS   : qmltest::Scatter3D Basic::cleanupTestCase()
PASS   : qmltest::Scatter3D Empty::initTestCase()
PASS   : qmltest::Scatter3D Empty::test_empty()
PASS   : qmltest::Scatter3D Empty::cleanupTestCase()
PASS   : qmltest::ItemModelScatterDataProxy Change::initTestCase()
PASS   : qmltest::ItemModelScatterDataProxy Change::test_change()
PASS   : qmltest::ItemModelScatterDataProxy Change::cleanupTestCase()
PASS   : qmltest::ItemModelScatterDataProxy Initialized::initTestCase()
PASS   : qmltest::ItemModelScatterDataProxy Initialized::test_initialized()
PASS   : qmltest::ItemModelScatterDataProxy Initialized::cleanupTestCase()
PASS   : qmltest::ItemModelScatterDataProxy Initial::initTestCase()
PASS   : qmltest::ItemModelScatterDataProxy Initial::test_initial()
PASS   : qmltest::ItemModelScatterDataProxy Initial::cleanupTestCase()
PASS   : qmltest::Scatter3D Series::initTestCase()
PASS   : qmltest::Scatter3D Series::test_1_add_series()
PASS   : qmltest::Scatter3D Series::test_2_remove_series()
PASS   : qmltest::Scatter3D Series::test_3_remove_series()
PASS   : qmltest::Scatter3D Series::test_4_selected_series()
PASS   : qmltest::Scatter3D Series::test_5_has_series()
PASS   : qmltest::Scatter3D Series::test_6_add_custom_item()
PASS   : qmltest::Scatter3D Series::test_7_remove_custom_item()
PASS   : qmltest::Scatter3D Series::cleanupTestCase()
QDEBUG : qmltest::UnknownTestFunc() qml: Signal 'selectedItemsChanged' not found
PASS   : qmltest::Scatter3DSeries Invalid::initTestCase()
QWARN  : qmltest::Scatter3DSeries Invalid::test_invalid() qt.graphs3d.properties: setItemSize invalid size. Valid range for itemSize is 0.0f...1.0f
QWARN  : qmltest::Scatter3DSeries Invalid::test_invalid() qt.graphs3d.properties: setItemSize invalid size. Valid range for itemSize is 0.0f...1.0f
PASS   : qmltest::Scatter3DSeries Invalid::test_invalid()
PASS   : qmltest::Scatter3DSeries Invalid::cleanupTestCase()
PASS   : qmltest::Scatter3DSeries Change::initTestCase()
PASS   : qmltest::Scatter3DSeries Change::test_1_change()
PASS   : qmltest::Scatter3DSeries Change::test_2_test_change()
PASS   : qmltest::Scatter3DSeries Change::test_3_change_common()
PASS   : qmltest::Scatter3DSeries Change::test_4_change_gradient_stop()
PASS   : qmltest::Scatter3DSeries Change::cleanupTestCase()
PASS   : qmltest::Scatter3DSeries Initialized::initTestCase()
PASS   : qmltest::Scatter3DSeries Initialized::test_1_initialized()
PASS   : qmltest::Scatter3DSeries Initialized::test_2_initialized_common()
PASS   : qmltest::Scatter3DSeries Initialized::cleanupTestCase()
PASS   : qmltest::Scatter3DSeries Initial::initTestCase()
PASS   : qmltest::Scatter3DSeries Initial::test_1_initial()
PASS   : qmltest::Scatter3DSeries Initial::test_2_initial_common()
PASS   : qmltest::Scatter3DSeries Initial::cleanupTestCase()
PASS   : qmltest::Spline3DSeries Invalid::initTestCase()
QWARN  : qmltest::Spline3DSeries Invalid::test_invalid() qt.graphs3d.properties: setItemSize invalid size. Valid range for itemSize is 0.0f...1.0f
QWARN  : qmltest::Spline3DSeries Invalid::test_invalid() qt.graphs3d.properties: setItemSize invalid size. Valid range for itemSize is 0.0f...1.0f
QWARN  : qmltest::Spline3DSeries Invalid::test_invalid() qt.graphs3d.properties: setSplineTension invalid tension. Valid range for tension is 0.0f...1.0f
QWARN  : qmltest::Spline3DSeries Invalid::test_invalid() qt.graphs3d.properties: setSplineKnotting invalid knotting. Valid range for knotting is 0.0f...1.0f
QWARN  : qmltest::Spline3DSeries Invalid::test_invalid() qt.graphs3d.properties: setSplineResolution invalid resolution. The resolution must be 2 or above
PASS   : qmltest::Spline3DSeries Invalid::test_invalid()
PASS   : qmltest::Spline3DSeries Invalid::cleanupTestCase()
PASS   : qmltest::Spline3DSeries Change::initTestCase()
PASS   : qmltest::Spline3DSeries Change::test_1_change()
PASS   : qmltest::Spline3DSeries Change::test_2_test_change()
PASS   : qmltest::Spline3DSeries Change::test_3_change_common()
PASS   : qmltest::Spline3DSeries Change::test_4_change_gradient_stop()
PASS   : qmltest::Spline3DSeries Change::cleanupTestCase()
PASS   : qmltest::Spline3DSeries Initialized::initTestCase()
PASS   : qmltest::Spline3DSeries Initialized::test_1_initialized()
PASS   : qmltest::Spline3DSeries Initialized::test_2_initialized_common()
PASS   : qmltest::Spline3DSeries Initialized::cleanupTestCase()
PASS   : qmltest::Spline3DSeries Initial::initTestCase()
PASS   : qmltest::Spline3DSeries Initial::test_1_initial()
PASS   : qmltest::Spline3DSeries Initial::test_2_initial_common()
PASS   : qmltest::Spline3DSeries Initial::cleanupTestCase()
PASS   : qmltest::Scene zero query::initTestCase()
PASS   : qmltest::Scene zero query::test_zero_query()
PASS   : qmltest::Scene zero query::cleanupTestCase()
PASS   : qmltest::Scene invalid query::initTestCase()
PASS   : qmltest::Scene invalid query::test_invalid_query()
PASS   : qmltest::Scene invalid query::cleanupTestCase()
PASS   : qmltest::Scene valid query::initTestCase()
PASS   : qmltest::Scene valid query::test_valid_query()
PASS   : qmltest::Scene valid query::cleanupTestCase()
PASS   : qmltest::Scene3D Invalid::initTestCase()
QWARN  : qmltest::Scene3D Invalid::test_invalid() qt.graphs3d.scene: Viewport is invalid.
PASS   : qmltest::Scene3D Invalid::test_invalid()
PASS   : qmltest::Scene3D Invalid::cleanupTestCase()
PASS   : qmltest::Scene3D Change::initTestCase()
PASS   : qmltest::Scene3D Change::test_change()
PASS   : qmltest::Scene3D Change::cleanupTestCase()
PASS   : qmltest::Scene3D Initialized::initTestCase()
PASS   : qmltest::Scene3D Initialized::test_initialized()
PASS   : qmltest::Scene3D Initialized::cleanupTestCase()
PASS   : qmltest::Scene3D Initial::initTestCase()
PASS   : qmltest::Scene3D Initial::test_initial()
PASS   : qmltest::Scene3D Initial::cleanupTestCase()
PASS   : qmltest::Surface3D Common::initTestCase()
PASS   : qmltest::Surface3D Common::test_1_common()
QWARN  : qmltest::Surface3D Common::test_2_change_common() qt.quick3d.render: Order Independent Transparency requested, but disabled due to invalid blend modes.
QWARN  : qmltest::Surface3D Common::test_2_change_common() qt.quick3d.render: Use SourceOver blend mode for Order Independent Transparency.
PASS   : qmltest::Surface3D Common::test_2_change_common()
QWARN  : qmltest::Surface3D Common::test_3_change_invalid_common() qt.graphs3d.properties: setSelectionMode must specify one of either row or column selection modein conjunction with slicing mode.
QWARN  : qmltest::Surface3D Common::test_3_change_invalid_common() qt.graphs3d.properties: setRenderingMode invalid rendering mode used
QWARN  : qmltest::Surface3D Common::test_3_change_invalid_common() qt.graphs3d.properties: setAmbientLightStrength invalid value. Valid range for ambientLightStrength is between 0.0f and 1.0f
QWARN  : qmltest::Surface3D Common::test_3_change_invalid_common() qt.graphs3d.properties: setAmbientLightStrength invalid value. Valid range for ambientLightStrength is between 0.0f and 1.0f
QWARN  : qmltest::Surface3D Common::test_3_change_invalid_common() qt.graphs3d.properties: setLightStrength invalid value. Valid range for lightStrength is between 0.0f and 10.0f
QWARN  : qmltest::Surface3D Common::test_3_change_invalid_common() qt.graphs3d.properties: setLightStrength invalid value. Valid range for lightStrength is between 0.0f and 10.0f
QWARN  : qmltest::Surface3D Common::test_3_change_invalid_common() qt.graphs3d.properties: setShadowStrength invalid value. Valid range for shadowStrength is between 0.0f and 100.0f
QWARN  : qmltest::Surface3D Common::test_3_change_invalid_common() qt.graphs3d.properties: setShadowStrength invalid value. Valid range for shadowStrength is between 0.0f and 100.0f
PASS   : qmltest::Surface3D Common::test_3_change_invalid_common()
QWARN  : qmltest::Surface3D Common::test_4_common_initialized() qt.graphs3d.properties: setRenderingMode invalid rendering mode used
PASS   : qmltest::Surface3D Common::test_4_common_initialized()
PASS   : qmltest::Surface3D Common::cleanupTestCase()
QWARN  : qmltest::UnknownTestFunc() qt.quick3d.render: Order Independent Transparency requested, but disabled due to invalid blend modes.
QWARN  : qmltest::UnknownTestFunc() qt.quick3d.render: Use SourceOver blend mode for Order Independent Transparency.
PASS   : qmltest::Surface3D Basic::initTestCase()
PASS   : qmltest::Surface3D Basic::test_1_basic()
PASS   : qmltest::Surface3D Basic::test_2_change_basic()
PASS   : qmltest::Surface3D Basic::cleanupTestCase()
PASS   : qmltest::Surface3D Empty::initTestCase()
PASS   : qmltest::Surface3D Empty::test_empty()
PASS   : qmltest::Surface3D Empty::cleanupTestCase()
PASS   : qmltest::HeightMapSurfaceDataProxy Invalid::initTestCase()
QWARN  : qmltest::HeightMapSurfaceDataProxy Invalid::test_invalid() qt.graphs3d.properties: setMaxXValue tried to set maximum X to equal or smaller than minimum X for value range. Minimum automatically adjusted to a valid one: 0.000000 --> -11.000000
QWARN  : qmltest::HeightMapSurfaceDataProxy Invalid::test_invalid() qt.graphs3d.properties: setMinZValue tried to set minimum Z to equal or larger than maximum Z for value range. Maximum automatically adjusted to a valid one: 10.000000 --> 21.000000
PASS   : qmltest::HeightMapSurfaceDataProxy Invalid::test_invalid()
PASS   : qmltest::HeightMapSurfaceDataProxy Invalid::cleanupTestCase()
PASS   : qmltest::HeightMapSurfaceDataProxy Change::initTestCase()
PASS   : qmltest::HeightMapSurfaceDataProxy Change::test_1_change()
PASS   : qmltest::HeightMapSurfaceDataProxy Change::test_2_test_change()
PASS   : qmltest::HeightMapSurfaceDataProxy Change::cleanupTestCase()
PASS   : qmltest::HeightMapSurfaceDataProxy Initialized::initTestCase()
PASS   : qmltest::HeightMapSurfaceDataProxy Initialized::test_initialized()
PASS   : qmltest::HeightMapSurfaceDataProxy Initialized::cleanupTestCase()
PASS   : qmltest::HeightMapSurfaceDataProxy Initial::initTestCase()
PASS   : qmltest::HeightMapSurfaceDataProxy Initial::test_initial()
PASS   : qmltest::HeightMapSurfaceDataProxy Initial::cleanupTestCase()
PASS   : qmltest::ItemModelSurfaceDataProxy MultiMatchBehaviour::initTestCase()
PASS   : qmltest::ItemModelSurfaceDataProxy MultiMatchBehaviour::test_0_async_dummy()
PASS   : qmltest::ItemModelSurfaceDataProxy MultiMatchBehaviour::test_1_test_multimatch()
PASS   : qmltest::ItemModelSurfaceDataProxy MultiMatchBehaviour::test_2_multimatch()
PASS   : qmltest::ItemModelSurfaceDataProxy MultiMatchBehaviour::test_3_test_multimatch()
PASS   : qmltest::ItemModelSurfaceDataProxy MultiMatchBehaviour::test_4_multimatch()
PASS   : qmltest::ItemModelSurfaceDataProxy MultiMatchBehaviour::test_5_test_multimatch()
PASS   : qmltest::ItemModelSurfaceDataProxy MultiMatchBehaviour::test_6_multimatch()
PASS   : qmltest::ItemModelSurfaceDataProxy MultiMatchBehaviour::test_7_test_multimatch()
PASS   : qmltest::ItemModelSurfaceDataProxy MultiMatchBehaviour::test_8_multimatch()
PASS   : qmltest::ItemModelSurfaceDataProxy MultiMatchBehaviour::test_9_test_multimatch()
PASS   : qmltest::ItemModelSurfaceDataProxy MultiMatchBehaviour::cleanupTestCase()
PASS   : qmltest::ItemModelSurfaceDataProxy Change::initTestCase()
PASS   : qmltest::ItemModelSurfaceDataProxy Change::test_1_change()
PASS   : qmltest::ItemModelSurfaceDataProxy Change::test_2_test_change()
PASS   : qmltest::ItemModelSurfaceDataProxy Change::cleanupTestCase()
PASS   : qmltest::ItemModelSurfaceDataProxy RoleReplace::initTestCase()
PASS   : qmltest::ItemModelSurfaceDataProxy RoleReplace::test_initialized()
PASS   : qmltest::ItemModelSurfaceDataProxy RoleReplace::cleanupTestCase()
PASS   : qmltest::ItemModelSurfaceDataProxy Initialized::initTestCase()
PASS   : qmltest::ItemModelSurfaceDataProxy Initialized::test_initialized()
PASS   : qmltest::ItemModelSurfaceDataProxy Initialized::cleanupTestCase()
PASS   : qmltest::ItemModelSurfaceDataProxy Initial::initTestCase()
PASS   : qmltest::ItemModelSurfaceDataProxy Initial::test_initial()
PASS   : qmltest::ItemModelSurfaceDataProxy Initial::cleanupTestCase()
PASS   : qmltest::Surface3D Series::initTestCase()
PASS   : qmltest::Surface3D Series::test_1_add_series()
PASS   : qmltest::Surface3D Series::test_2_remove_series()
PASS   : qmltest::Surface3D Series::test_3_remove_series()
PASS   : qmltest::Surface3D Series::test_4_selected_series()
PASS   : qmltest::Surface3D Series::test_5_has_series()
PASS   : qmltest::Surface3D Series::test_6_add_custom_item()
PASS   : qmltest::Surface3D Series::test_7_remove_custom_item()
PASS   : qmltest::Surface3D Series::cleanupTestCase()
PASS   : qmltest::Surface3DSeries Change::initTestCase()
PASS   : qmltest::Surface3DSeries Change::test_1_change()
PASS   : qmltest::Surface3DSeries Change::test_2_test_change()
PASS   : qmltest::Surface3DSeries Change::test_3_change_common()
PASS   : qmltest::Surface3DSeries Change::test_4_change_gradient_stop()
PASS   : qmltest::Surface3DSeries Change::cleanupTestCase()
PASS   : qmltest::Surface3DSeries Initialized::initTestCase()
PASS   : qmltest::Surface3DSeries Initialized::test_1_initialized()
PASS   : qmltest::Surface3DSeries Initialized::test_2_initialized_common()
PASS   : qmltest::Surface3DSeries Initialized::cleanupTestCase()
PASS   : qmltest::Surface3DSeries Initial::initTestCase()
PASS   : qmltest::Surface3DSeries Initial::test_1_initial()
PASS   : qmltest::Surface3DSeries Initial::test_2_initial_common()
PASS   : qmltest::Surface3DSeries Initial::cleanupTestCase()
Totals: 310 passed, 0 failed, 0 skipped, 0 blacklisted, 8997ms
********* Finished testing of qmltest *********
